Everest Scissors
Everest Scissors
Paharganj, New Delhi, Delhi
SEND SMS
SEND EMAIL

Cement and Concrete Testing Equipment

Prominent & Leading Manufacturer from New Delhi, we offer flexure testing machine (motorized) rilem - cembureau test, flexure testing machine- hand operated, flexure testing machine (electrically operated), laboratory concrete mixer (motorized), laboratory concrete mixer (hand operated) and air entertainment meter.

Flexure Testing Machine (Motorized) Rilem - Cembureau Test

Flexure Testing Machine (Motorized) Rilem - Cembureau Test
  • Flexure Testing Machine (Motorized) Rilem - Cembureau Test
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading.

Features:

  • Specifications : It is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kg/sec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 Volts, single phase, 50 cycles A.C.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring.
  • Accessories: Proving ring, capacity 500 Kn.
Request
Callback


Additional Information:

  • Item Code: FTM-01
Yes! I am Interested

Flexure Testing Machine- Hand Operated

Flexure Testing Machine- Hand Operated
  • Flexure Testing Machine- Hand Operated
Get Best Quote
Approx. Price: Rs 40,000 / PieceGet Latest Price
Flexural tests of concrete beam have their own importance in concrete road constructions as well as buildings constructions. Normally concrete beams of sizes 10cm x 10cm x 50cm or 15cm x 15cm x 70cm are tested for flexural strength.

Features:

  • Specifications : The machine consists of a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 700mm beam, the centre to centre distance between the rollers is 600mm, while it is 400mm for beams of size 100mm x 100mm x 500mm The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm X 150mm X 700mm size beam and 133mm for 100mm 100mm X 100mm X 500mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100 KN and a 150mm dia pressure gauge - 100 KN x 1 KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory also.
Request
Callback


Additional Information:

  • Item Code: FTM-02
Yes! I am Interested

Flexure Testing Machine (Electrically Operated)

Flexure Testing Machine (Electrically Operated)
  • Flexure Testing Machine (Electrically Operated)
Get Best Quote
Approx. Price: Rs 65,000 / PieceGet Latest Price
Same as above but instead of a hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied. The pressure gauge 0-100 kn x 1 kn, on/off switch and a slow/fast level to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protects the unit from over loading.

Specifications:
  • Power: Electronic
  • Maximum test force (kN): 2000
  • Bearing plate size (mm): 320x260
Request
Callback


Additional Information:

  • Item Code: FTM-03
Yes! I am Interested

Laboratory Concrete Mixer (Motorized)

Laboratory Concrete Mixer (Motorized)
  • Laboratory Concrete Mixer (Motorized)
Get Best Quote
Approx. Price: Rs 35,000 / PieceGet Latest Price
Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½H.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase.

Specifications:
  • Dimension: 5300x2400x3450 mm
  • Maximum Towing Speed: 14kw/h
  • Power: 13.75Kw
Request
Callback


Additional Information:

  • Item Code: LCM-01
Yes! I am Interested

Laboratory Concrete Mixer (Hand Operated)

Laboratory Concrete Mixer (Hand Operated)
  • Laboratory Concrete Mixer (Hand Operated)
Get Best Quote
Approx. Price: Rs 25,000 / PieceGet Latest Price
This is a hand operated concrete mixer and is suitable to mix 1 cut to 1. 1/2 CFT material. It is mounted on two rubber tyred/stand.

Specifications:
  • Weight: 2000Kg
  • Mixing Star Mixing Blade (Qty): 1x2
  • Mixing Power: 15KW
Request
Callback


Additional Information:

  • Item Code: LCM-02
Yes! I am Interested

Air Entertainment Meter

Air Entertainment Meter
  • Air Entertainment Meter
Get Best Quote
Approx. Price: Rs 14,000 / PieceGet Latest Price
As entertainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additices to increase workability of concrete requires an air content check to be made. Air entertainment meters are used to determine air entertained in freshly mixed concrete by pressure method.

Features:


 

  • Specification : The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories. Calibration cylinder with spring clamp, Trowel, Tamping rod, Straight edge, Rubber mallet and measure.
  • Also available with a pressure tight flanged cylindrical measuring bowl of 0.007 cubic meter capacity for maximum size of aggregate 38mm.
  • Also available with a pressure tight flanged cylindrical measuring bowl of 0.01 cubic meter capacity for maximum size of aggregate 75mm.
  • Also available with a pressure tight flanged cylindrical measuring bowl of 0.1 cubic meter capacity for maximum size of aggregate 150mm. Spaces: Rubber pressure bulb with tube & gasket for vessel
Request
Callback


Additional Information:

  • Item Code: AEM-01
Yes! I am Interested

Blaines Air Permeability Apparatus

Blaines Air Permeability Apparatus
  • Blaines Air Permeability Apparatus
Get Best Quote
Approx. Price: Rs 8,000 / PieceGet Latest Price
The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.

 Features:

 

 

  • Specification : The apparatus consists one each of permeability cell 12.5mm I.D., Manometer 'U' type mounted on stand with a built in stop cock, Perforated disc, Plunger Rubber stopper, Rubber tube 30cm long. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.
  • Spares and Accessories : Punch to cut filter paper discs. Non-perforated disc. Suction bulb.
Request
Callback


Additional Information:

  • Item Code: BPA-01
Yes! I am Interested

Camber Board

Camber Board
  • Camber Board
Get Best Quote
Approx. Price: Rs 8,000 / PieceGet Latest Price
Used to check and maintain the slope of the road as per design. Material:- Aluminium section of size 24 mm x 45 mm of thick gauge. Size: 3 meters long
Request
Callback


Additional Information:

  • Item Code: CB-01
Yes! I am Interested

Capping Set

Capping Set
  • Capping Set
Get Best Quote
Approx. Price: Rs 7,500 / pieceGet Latest Price
For correct compressive strength of concrete cylinders, the end surfaces of the specimen must be truly flat. If they are not using capping compound and a capper, the faces are plastered flat. Capping set can be used for cylindrical specimen like concrete cylinders of cores. It can be used in laboratory or in field.
Request
Callback


Additional Information:

  • Item Code: CS-01
Yes! I am Interested

Capping Set- Horizontal

Capping Set- Horizontal
  • Capping Set- Horizontal
Get Best Quote
Approx. Price: Rs 18,000 / PieceGet Latest Price
For 15cm dia x 30cm length cylinders. specifications : the set comprises of a cylinder capper, a cylinder carrier and a ladle. The cylinder capper consists of a base on which two accurately machined plates are mounted vertically. Once plate is firmly fixed and the other one is adjustable horizontally. Two plates are provided with holders for holding the cylinder in position. The holders are split and the bottom half of each holder is fixed firmly and the top half of each is removable and bolted down to the lower half. On the upper parts of the vertical plates 'v's are provided for pouring the capping compound. Two spacers are also provided. Complete with cylinder carrier and ladle for molten compound.

Features:

 

 

  • For 100mm dia x 200mm length cylinders.
  • Specification : Same as above but for use with specimens 100mm dia X 200mm long
Request
Callback


Additional Information:

  • Item Code: CS-02
Yes! I am Interested

Capping Set - Vertical

Capping Set - Vertical
  • Capping Set - Vertical
Get Best Quote
Approx. Price: Rs 9,000 / PieceGet Latest Price
For capping compression cylinder specimens. This apparatus can be used both in the laboratory and in the field. The specimens capped in this apparatus have plane parallel faces.

 Features:

 

 

  • Specification : For cylinders 150mm dia x 300mm long. Consists of a base with an upright. The upright serves as a guide for positioning the capping plate and the cylinder. The 19mm thick capping plate is machined accurately. There is a recess in the plate for keeping the molten capping compound and to position cylinder. Complete with cylinder carrier and ladle.
  • For cylinders 100mm dia X 20mm long: Same as above but for cylinders 100mm dia X 200mm long
Request
Callback


Additional Information:

  • Item Code: CS-03
Yes! I am Interested

Accessories with Capping Set

Accessories with Capping Set
  • Accessories with Capping Set
Get Best Quote
Approx. Price: Rs 6,500 / PieceGet Latest Price
Cylinder carrier : for carrying the concrete cylinders in the laboratory and in the field. Double handles make it easy to hold the cylinder during capping operations. Complete with snap clamp and cushioning lining. Can be used both for 15cm dia and 10cm dia cylinders. capping mould : for capping the concrete cylinders, it consists of an accurately machined plate with a recess for 15mm dia specimen. warmer : an electrically heated and thermostatically controlled bath for melting the capping compound. Supplied with cover and handle. Suitable for operation on 230 volts A. C. Single phase. capping compound : used for capping the ends of concrete cylinders to be tested. Available in packs of 5 kg. bowl & ladle : metallic bowl is used to carry the capping compound and ladle is used to pour molten capping compound into the groves between specimen and capping plate. Supplied as set.
Request
Callback


Additional Information:

  • Item Code: CS-04
Yes! I am Interested

Compaction Factor Apparatus

Compaction Factor Apparatus
  • Compaction Factor Apparatus
Get Best Quote
Approx. Price: Rs 13,500 / PieceGet Latest Price
The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low workability where true slump values are not reliable.

 Features:

 

 

  • Specification : It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap-doors having quick release catches. A circular metal plate is provided to cover the top of the cylinder. Supplied complete with one plasterer's trowel and one tamping rod, 16mm dia x 600mm long, one end rounded.
Request
Callback


Additional Information:

  • Item Code: CFA-01
Yes! I am Interested

Compression Testing Machine

Compression Testing Machine
  • Compression Testing Machine
Get Best Quote
Approx. Price: Rs 1 Lakh / PieceGet Latest Price
Principal of operation: operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydro-statically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamo-meter system housed in the control panel. The cylinder of the dynamo-meter is also of self-lubricating design. The piston of the dynamo-meter is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamo-meter is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. application : fie compression testing machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Features:

  • The FIE Compression Testing Machine Incorporates design features to enable high accuracy testing with economy, speed & versatility.
  • Loading Accuracy as high as + 1%
  • Straining at variable speeds to suit a wide range of materials.
  • Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
  • Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.
  • High reading accuracy due to large size and design of dial.
  • Wide range of standard and special accessories, including load stabilizer.
  • Large effective clearance between columns enables testing of standards specimens as well as structures.
  • Simple controls for easy of operation.
  • Robust staining frame of an extremely rigid construction.
  • Safe operation ensured be means of safety devices.
  • Control Panel: The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.
Request
Callback


Additional Information:

  • Item Code: CTM-0
Yes! I am Interested

Compression Testing Machine (Plate Model)

Compression Testing Machine (Plate Model)
  • Compression Testing Machine (Plate Model)
Get Best Quote
Approx. Price: Rs 75,000 / PieceGet Latest Price
Compression testing machine - plate model, complete with single pressure gauge & self made motor, 440 ‘v’ load frames: available in 50 tons, 100 tons, 150 tons, 200 tons, 300 tons, 500 tons. model available: hand operated, electric cum hand operated & electric with display
Request
Callback


Additional Information:

  • Item Code: CTM-PT02
Yes! I am Interested

Compression Testing Machine (Channel Type)

Compression Testing Machine (Channel Type)
  • Compression Testing Machine (Channel Type)
Get Best Quote
Approx. Price: Rs 38,000 / PieceGet Latest Price
Compression testing machine - channel type model, complete with single pressure gauge & self made motor, 440 ‘v’ load frames: available in 100 tons, 150 tons, 200 tons. Models available: hand operated & electric cum hand operated
Request
Callback


Additional Information:

  • Item Code: CTM-CT03
Yes! I am Interested

Compression Testing Machine 2 Pillars Type

Compression Testing Machine 2 Pillars Type
  • Compression Testing Machine 2 Pillars Type
Get Best Quote
Approx. Price: Rs 45,000 / PieceGet Latest Price
Compression Testing Machine - 2Pillars Nut Type Model, complete with Single Pressure Gauge & Self Made Motor, 440 ‘V’ Load Frames: Available in 100 Tons, 150 Tons, 200 Tons. Model Available: Hand Operated & Electrically cum Hand Operated
Request
Callback


Additional Information:

  • Item Code: CTM-2P04
Yes! I am Interested

Compression Testing Machine (4 Pillars Type)

Compression Testing Machine (4 Pillars Type)
  • Compression Testing Machine (4 Pillars Type)
Get Best Quote
Approx. Price: Rs 43,000 / PieceGet Latest Price
Compression Testing Machine - 4 Pillars Nut Type Model, complete with Single Pressure Gauge & Self Made Motor, 440 ‘V’ Load Frames: Available in 50 Tons, 100 Tons, 150 Tons, 200 Tons, 300 Tons, 500 Tons. Available: Hand Operated & Electric cum Hand Operated in Welded & Nut Type Model.
Request
Callback


Additional Information:

  • Item Code: CTM-4P05
Yes! I am Interested

Concrete Permeability Apparatus - Single Cell

Concrete Permeability Apparatus - Single Cell
  • Concrete Permeability Apparatus - Single Cell
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
One of the durability tests of concrete is to determine permeability of water through specimen. Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory.

Features:

 

 

  • Specification :The concrete permeability apparatus comprises of a brass/ gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate, and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure air line or by a compressor.
  • Available for sample of size 150mm dia X 150mm high.
  • Available for sample of size 100mm dia X 100mm high.
Request
Callback


Additional Information:

  • Item Code: CPA-01
Yes! I am Interested

Concrete Permeability Apparatus - Three Cell Model

Concrete Permeability Apparatus - Three Cell Model
  • Concrete Permeability Apparatus - Three Cell Model
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
Same as above but supplied with three individual cells with stand. Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber.

Features:

 

 

  • Available for three samples of size 150mm dia X 150mm high.
  • Available for three samples of size 100mm dia X 100mm high.
  • Accessories: Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity
Request
Callback


Additional Information:

  • Item Code: CPA-02
Yes! I am Interested

Concrete Test Hammer

Concrete Test Hammer
  • Concrete Test Hammer
Get Best Quote
Approx. Price: Rs 10,000 / PieceGet Latest Price
The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in mpa or psi can be found, with +/-20% of actual.

Features:

 

 

  • Specification : Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.
Request
Callback


Additional Information:

  • Item Code: CTH-01
Yes! I am Interested

Curing Tank

Curing Tank
  • Curing Tank
Get Best Quote
Approx. Price: Rs 38,000 / PieceGet Latest Price
24 Hour cycle from time of mixing. - Controlled 35oC or 100oC ±2oC Curing Temperature for concrete. - Controlled 27oC ± 2oC Curing Temperature for grey cement. The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens.

 Features:


 

  • Curing Tank for 6/12 moulds of 150mm / 70.6mm size
  • Curing Tank for 12/24 moulds of 150mm / 70.6mm size
Request
Callback


Additional Information:

  • Item Code: CT-01
Yes! I am Interested

Flow Table IS:6932 - Hand Operated

Flow Table IS:6932 - Hand Operated
  • Flow Table IS:6932 - Hand Operated
Get Best Quote
Approx. Price: Rs 12,000 / PieceGet Latest Price
This is used for determining the workability of building limes.

 Features:

 

 

  • Specifications : The flow table consists of a 30cm. dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19cm. dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm I.D. at base and 40mm I.D. at top, height of the mould 90mm.
Request
Callback


Additional Information:

  • Item Code: FT-01
Yes! I am Interested

Flow Table IS:1199-1959 Hand Operated

Flow Table IS:1199-1959 Hand Operated
  • Flow Table IS:1199-1959 Hand Operated
Get Best Quote
Approx. Price: Rs 14,000 / PieceGet Latest Price
It is used for determining the flow of cement concrete.

 Features:

 

 

  • Specifications : Consists of a steel table top 76.2cm (30 inch.dia), finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to lift and drop the table by 12.5mm. The hand wheel makes it simple to operate the table. Supplied with one conical mould with handles, 12cm. height having 17cm. top internal diameter and 25cm. I.D. at the base. Complete with a tamping rod 16mm. dia x 600 mm long one end rounded.
Request
Callback


Additional Information:

  • Item Code: FT-02
Yes! I am Interested

Flow Table IS: 1199 - Motorized

Flow Table IS: 1199 - Motorized
  • Flow Table IS: 1199 - Motorized
Get Best Quote
Approx. Price: Rs 28,000 / PieceGet Latest Price
Specifications :

  • same as above but electrically operated, to raise and drop the table top, approx. 15 times in 15 seconds. Suitable for operation on 230 volts, 50 cycles, A.C. Supply.
Request
Callback


Additional Information:

  • Item Code: FT-03
Yes! I am Interested

Flow Table IS:5512 - Hand Operated

Flow Table IS:5512 - Hand Operated
  • Flow Table IS:5512 - Hand Operated
Get Best Quote
Approx. Price: Rs 12,000 / PieceGet Latest Price
This is used for measuring the consistency of pozzolanas and also cement mortar and hydrated lime.

Features:

 

 

  • Specification : It consists of a machined brass table top 250+/-2.5mm. dia mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to conical brass mould 100mm I.D. top dia. and 50mm high.
  • Accessorie: Mild steel plate 25mm. thick and 25 cm. square for fixing to the underside of the base.
Request
Callback


Additional Information:

  • Item Code: FT-04
Yes! I am Interested

Flow Table IS:5512 - Motorized

Flow Table IS:5512 - Motorized
  • Flow Table IS:5512 - Motorized
Get Best Quote
Approx. Price: Rs 28,000 / PieceGet Latest Price
Same as above but electrically operated. Fitted with a motor. Connected to the cam shaft through a reduction gear to give approximately 100rpm. Suitable for operation in single phase 230 Volts, 50 Cycles, A.C. supply.
Request
Callback


Additional Information:

  • Item Code: FT-05
Yes! I am Interested

Gauging Trowel

Gauging Trowel
  • Gauging Trowel
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price
Specifications :

  •  weight approximately 210gm. Best quality with hardwood handle blade length approx. 200mm.
Request
Callback


Additional Information:

  • Item Code: GT-01
Yes! I am Interested

Trowel

Trowel
  • Trowel
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price
Specifications :

  • 100 to 150mm long steel blade with straight edges.
Request
Callback


Additional Information:

  • Item Code: GT-02
Yes! I am Interested

Gillmore Needle Apparatus

Gillmore Needle Apparatus
  • Gillmore Needle Apparatus
Get Best Quote
Approx. Price: Rs 24,500 / PieceGet Latest Price
This instrument is used for determining the time setting of hydraulic cement.

 Features:

 

 

  • Specification : A base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 No. Initial Needle 1/12 inch dia 1/4 lb.wt. 1No. Final Needle 1/12 inch dia. 1lb.wt. 1No. Glass base plate. Complete as above.
Request
Callback


Additional Information:

  • Item Code: GNA-01
Yes! I am Interested

Hydraulic Jack (Hand Operated) Remote Type

Hydraulic Jack (Hand Operated) Remote Type
  • Hydraulic Jack (Hand Operated) Remote Type
Get Best Quote
Approx. Price: Rs 42,000 / PieceGet Latest Price
For applying loads for various tests in the field or laboratory. Hydraulic jack hand operated with separate pumping units. These jacks are portable and available in various capacities. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe 2 meter long. The jack is fitted with lifting handles for easy transportation. The approximate lift of the ram is 90 to 120mm. The pumping unit is a single plunger type with detachable handle. The unit is fixed on a channeled base which is fitted with lifting handles. A pressure release valve is provided on the pumping unit. The load is indicated on a 15cm dial hydraulic pressure gauge of appropriate capacity which can be detached from the pump when not in use. The least count of the calibrated dial will be according to the capacity of the gauge (normally 100 divisions for full capacity)
Request
Callback


Additional Information:

  • Item Code: HJ-01
Yes! I am Interested

Integral Type Hydraulic Jacks

Integral Type Hydraulic Jacks
  • Integral Type Hydraulic Jacks
Get Best Quote
Approx. Price: Rs 28,000 / PieceGet Latest Price
These are hydraulic jacks with integral pumping unit. The hydraulic pressure gauge is of 15cm dial mounted on the side of hydraulic jack. A detachable lever is provided to operate the pump. Lift of the ram is 95 to 100mm. Face of the ram is flat.

Note: Hydraulic jacks of 1000 kn & 5000 kn capacity can be supplied with two speed pumping units. These jacks have lift to approximately 200mm.
Request
Callback


Additional Information:

  • Item Code: HJ-02
Yes! I am Interested

Hydraulic Jack Central Hole Type- Capacity 50 Tonnes

Hydraulic Jack Central Hole Type- Capacity 50 Tonnes
  • Hydraulic Jack Central Hole Type- Capacity 50 Tonnes
Get Best Quote
Approx. Price: Rs 55,000 / PieceGet Latest Price
The hydraulic jack has a 25mm diameter hole going through the centre. It is designed for dual direction and has a working stroke of approximately 22cm. A specially designed hand operated pumping unit is supplied for operation in both directions. A detachable handle is provided for operating the pump. The load is indicated on a 15cm dial hydraulic pressure gauge calibrated 0 - 50000 x 500 kg.

Note: central hole jacks of other capacities can also be supplied on special request.
Request
Callback


Additional Information:

  • Item Code: HJ-03
Yes! I am Interested

Jolting Apparatus

Jolting Apparatus
  • Jolting Apparatus
Get Best Quote
Approx. Price: Rs 39,000 / PieceGet Latest Price
For making standard rectangular specimens of 40 x 40 x 160mm. Of port land and pozzolana cement mortar for determining the transverse strength.

Features:
  • Specification : The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the centre of the table. There is a projecting lug with a plane face on the lower face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gear box through a V-belt and pulleys. The cam rotates at a rate of 60 rev./min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, single phase. A.C.supply.
  • Spares and Accessories :
    (1) Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm. internal dimensions.
    (2) Apparatus for demoulding the specimen.
Request
Callback


Additional Information:

  • Item Code: JA-01
Yes! I am Interested

Kelley Ball Penetration Apparatus

Kelley Ball Penetration Apparatus
  • Kelley Ball Penetration Apparatus
Get Best Quote
Approx. Price: Rs 65,000 / PieceGet Latest Price
The apparatus is used to determine the workability of Portland cement concrete. The Kelly ball test is considered to be simple and much faster than the slump test. Twice the Kelly ball reading approximately equals the slump.

Features:

Specification : It consists of a cylinder with a ball-shaped bottom and handle, together weighing 15 kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in MM. Penetration can be recorded to the nearest 0.5mm.
Request
Callback


Additional Information:

  • Item Code: KBP-01
Yes! I am Interested

Laboratory Cement Autoclave

Laboratory Cement Autoclave
  • Laboratory Cement Autoclave
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
With stainless steel chamber (21 kg/cm.sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height suitable for operation on 230 v, 50 Hz, Single Phase, A.C.Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.
Request
Callback


Additional Information:

  • Item Code: LCA-01
Yes! I am Interested

Lateral Extensometer

Lateral Extensometer
  • Lateral Extensometer
Get Best Quote
Approx. Price: Rs 16,500 / PieceGet Latest Price
This is for determining the lateral extension of 15cms dia x 30cm high cement concrete cylinders while testing them under compression.

Features:
  • Specification : The unit consists of two movable frames pivoted at one end. The extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of 0.002mm x 12mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact readings.
    A spacer strip is provided to initially set the dial gauge, and can be removed after initial setting. Supplied in a wooden carrying case.
Request
Callback


Additional Information:

  • Item Code: LE-01
Yes! I am Interested

LE Chatelier Flask

LE Chatelier Flask
  • LE Chatelier Flask
Get Best Quote
Approx. Price: Rs 1,000 / PieceGet Latest Price
Used for finding specific gravity of hydraulic cement. Made from borosil glass. The flask is 243mm in total height, having a bulb of 90 mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in which fits a ground glass stopper. The neck has over-all 11mm i. D. Upper portion is graduated from 18 ml to 24ml with 0. 1ml graduation. Just at the bottom of the neck 1ml capacity is marked in between there is 17ml capacity bulb.
Request
Callback


Additional Information:

  • Item Code: LCF-01
Yes! I am Interested

Concrete Test Hammer- Digital

Concrete Test Hammer- Digital
  • Concrete Test Hammer- Digital
Get Best Quote
Approx. Price: Rs 1.25 Lakh / PieceGet Latest Price
It is similar to the above with digital display of result.
Request
Callback


Additional Information:

  • Item Code: CTH-02
Yes! I am Interested

Hydraulic Jack For Pile Testing

Hydraulic Jack For Pile Testing
  • Hydraulic Jack For Pile Testing
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Same as above but useful for pile testing
Request
Callback


Additional Information:

  • Item Code: HJ-04
Yes! I am Interested
X

Explore more products



Reach Us
Manuj Mahajan (Proprietor)
No. 9238/6, Multani Dhanda, Paharganj, New Delhi- 110055, Delhi, India



Call Us

Share Us

F GT L


Send E-mailSend SMS